Hop roots – Rhizomes ( grow your own hops )

Posted on April 6, 2013 by ray kodiak

 

roots:DSC_0197

roots into plant, babies:

DSC_0203

prior years planting (hops come back every year):

DSC_0204

 

Hop rhizomes are basically the roots of a hop plant.  Brew stores sell these in the Spring.

My local brew stores had about a dozen to select from, (in picture above) are Chinook Hops.

http://en.wikipedia.org/wiki/Hops

A descent brew store will have some growing tip fliers printed out, so that you can read all about what you need to do.  Basically plant them on their side about 6 inches deep.  Eventually you will need a trellis as hops like to climb.  Hops are bines, not vines like grapes.  Regardless they link to climb.

Once the plant reaches the top of the trellis, guess what, it wants to climb even more, so most people then train them on a slightly sloped rope (that’s what we do).

Hops come back every year, like grapes and even stronger year over year and yield more and more…  hops.  It’s important to pick a permanent spot for the hop plant, it’s not something that you should ever be transplanting in relation to your property and optimum sun exposure times should be picked.

Expect to pay about $5 per root.

It’s important to learn all aspects of how-to-grow hops, especially how to correctly harvest (when) and dry hops before packaging them for long term storage.  If you incorrectly dry the hops, they can turn moldy on you and your entire years effort just was flushed down the toilet!

Hop On and Grow some Hops!

 

Posted in BEER Home Brewing | Tagged , , , | Comments Off on Hop roots – Rhizomes ( grow your own hops )

Belgian Pale Ale – 5 gallon batch

Posted on April 6, 2013 by ray kodiak

DSC_0201

A lighter Belgian beer, similar to a English Ale – with a medium copper color.

Not overly hoppy or malty.

Brewed on 4/7/2013 – OG was 1.059

Kegged Beer on 4/14/2013 – FG was 1.015

ABV% 5.78%

Standard mash at 152F for 30 minutes, boil for 60 minutes, ferment below 70F.

ABV / Alcohol by Volume: 5~6% +/- ( depends on the efficient of your brew equipment and your brew skills )

  • 12 lb Euroean Pale
  • 1 lb 2-row malt
  • 1 lb Victory malt
  • 1 lb Cara Munich malt
  • 1/2 lb of light sugar or honey or brown sugar – ( end of boil ), we used brown sugar
  • 1 3/4 oz Kent Golding hops – [ 1 oz at 20 minutes and 3/4 at 60 minutes ]
  • 1 1/2 oz Saaz hops – [ 1 oz at 10 minutes and 1/2 at 15 minutes ]

Use your house Belgian yeast or try: White Labs Belgian Ale (WLP550) or Abbey Ale (WLP530).

We ramp up slowly the yeast temperature starting at low 60s in the fermentor for metabolism reasons, so that the beers attenuation is not affected.

… more information will be posted later with OG, FG, thanks!

Posted in Belgian Beer Recipes | Tagged | Comments Off on Belgian Pale Ale – 5 gallon batch

IPA/Indian Pale Ale – All Grain – 5 Gallons

Posted on January 22, 2013 by ray kodiak

IPA

You will love this IPA, and that’s about it, there is nothing much else to say!

Of course everyone knows, but just incase – IPA = Indian Pale Ale.

Wiki: http://en.wikipedia.org/wiki/India_Pale_Ale

If you want to do a bigger or a smaller batch, divide all ingredients by 5 and then multiply by your batch size, (example * 1 for 1 gallon, * 3 for 3 gallons, * 10 for 10 gallons), this includes water used during mash, and sparge.

We employ a batch sparge method.

  1. The mash strike water mixed with the grains.
  2. The mash out water followed by drain.
  3. The sparge water followed by drain.

On #2 and #3 we re-circulate until the wort is nice and clear before draining off into the boiling kettle.  Google batch sparge if this is new to you or use your own method.

12 lbs 2 Row Pale
2 lbs Crystal 40
1 lb Wheat

Mash at 152 F, with total Boil time of 60 minutes.

  • 1 oz Centenial at 5 minutes from start of boil
  • 1 oz Centenial at 20 minutes from start of boil
  • 2 oz Northern Brewer at 60 minutes, end of boil

No dry hopping in this recipe, but that’s up to you!

If you are thinking how much water do you need for the initial strike and than sparge process, we used a on-line calculator to showcase how easy it to figure out, of course with time as you re-brew the same batch – you can make slight adjustment to bring it to Perfection:

http://www.brew365.com/mash_sparge_water_calculator.php

We used 5.5 gallons for strike-in and 4.33 gallons to the Sparge method we use, so total water needed for a 5 gallon batch is about 9.83 gallons or about 9 3/4 gallons…, 1/2 more than the Calculator (just incase).  Just enter the variables you know like (batch size, temperatures you will use, lb of total grain, etc…).

For yeast try to use a good house strain, so that you can re-capture it and use again and again and again, there is no need to be flushing your money $$$ down the drain every time you brew.  We are using a strain of yeast released by the brewery Rouge in Portland, OR – it’s called PACMAN by Wyeast – 0733347, details about it are below:

Beer Styles PACMAN can be used with: American Pale Ale, American Amber Ale, American Brown Ale, Brown Porter, Cream Ale, Irish Red Ale, Strong Scotch Ale, Dry Stout, American Stout, Russian Imperial Stout, American IPA, Imperial IPA, American Barleywine, Fruit Beer, Spice/Herb/or Vegetable Beer, Christmas/Winter Specialty Spice Beer, Other Smoked Beer, Wood-Aged Beer

(1.066 – 1.024) * 131 = 5.75%

OG was 1.066

FG 1.024, expected ABV 6-7 %, but will vary on your yeast/temperature, setup, skill and brew efficiency.

Remember!! No one owns beer brewing, so feel free to experinment, tweak, change away – use different hops if they are appropriate for an IPA.

Posted in BEER Recipes | Tagged | Comments Off on IPA/Indian Pale Ale – All Grain – 5 Gallons

Belgian White Ale – All Grain Recipe – 10 Gallons All Grain

Posted on January 5, 2013 by ray kodiak

DSC_0161

 Dude, its like drinking WOW in your mouth!

( the picture above was of only a 3 week old test pour out of Keg that was cold dropped only for overnight, that’s less than 24 hours!!! – makes HUGE difference! ), beer only gets better with time!

OG 1.048 +/-
FG 1.010 +/-

We use a converted Keg into a Mashtun with a false-bottom, see pictures…  Our efficiency currently varies between 75-80%, sometimes higher.

ABV / Alcohol by Volume: 5% (rounded off)

  • 9.5 lbs Belgian Pilsner (2-row), brew store might sell it under Euro Pilsner Malt.
  • 6 lbs White Wheat Malt, brew store might sell it under American Wheat Malt.
  • 5 lbs Flaked Wheat
  • 2 oz Cascade Hops – [ 1 oz at 5 minutes and one at 30 minutes ]
  • 1 oz Orange Peel, might be sold under Bitter Orange Peel – [ 15 minutes of boil ]
  • 1 oz Coriander Seed, (crush it – store might sell it un-crushed in a plastic bag) – [ 15 minutes of boil ]

Yeast Starter was used ahead of brew day.

Total boil time is 50 minutes, if you want to do 60 minutes, the World won’t end.  Primary ferment for a week+ or until reaction finishes, Secondary recommended; but not manditory.

For yeast we used a Wyeast 3787 re-captured Trappist HG (high gravity) yeast, but the original recipe called for a White Labs# WLP40 Wit Ale.  BTW: It’s ok to use (HG high-gravity) yeast on a (LG lower-gravity) beers, but not the other way around.

8.5 gallons of strike water at 163F, maintain for an hour (60 minutes) at 152F

Then Re-Mash 6.5 gallons of additional water for 30 minutes more at 168-172, we simply filled the mash tun with 6 gallons of additional water, stir it so often and drain it off at 30 minutes, the rest gets cooled and fed to horses and chickens.  Horses especially love the mash left overs, its like Candy to them and the chickens go nuts and lay later high quality eggs.

So total water for brew 15 gallons (mash + re-mash).

For fermentation we used a 15.5 gallon keg that was converted into a fermentor rather than splitting it into multiple glass carboys or some other method.

DSC_0144

After fermentation is done, we split into 2 soda kegs and carbonate.

DSC_0154

 

 

 

 

Posted in Belgian Beer Recipes | Tagged | Comments Off on Belgian White Ale – All Grain Recipe – 10 Gallons All Grain

How to cut out the top of a Beer Keg, turn it into a Keggle

Posted on December 15, 2012 by ray kodiak

Here is an affordable way to cut out the top from a industry standard 1/2 barrel (15.5 gallon keg).  I used a 4″ inch cutting wheel (rated for stainless steel) mounted inside of a 4″ grinder.  Later once hole cut out, I switch to a grinding wheel (not cutting wheel) to clean up the edges, link below to the youtube video.

You want to employ the safety shield that is installed in the grinder tool, don’t remove it.

Glide it along-side the inside rim of the keg (watch video), no template is needed.  First go around to create a mark line in the metal, if you make a mistake you can correct it, go around and do that first, don’t cut all the way in.  Once you are satisfied, then you can use the mark to easily glide along the metal and finish cutting it.

Youtube link to video is below:

Cut out Top from Keg Beer

Cheers!

Posted in BEER Home Brewing | Tagged | Comments Off on How to cut out the top of a Beer Keg, turn it into a Keggle